Why is the monitor Daisy Chain/MST (Multi-Stream Transport) feature not working with my Macbook?
MacBook doesn’t support MST(Multi-Stream Transport). Also, MST in general requires DisplayPort version 1.4 and above, so make sure your hardware has that specification (including the cable itself).
Do all SW series and PD series monitors support the VESA Quick feature?
Except for PD2700Q, all SW series and PD series monitors support the 100 x 100mm VESA Quick feature.
Does the AUX audio output of the monitor pass through raw signal or processed signals?
For all PD series models, audio output is in the form of a raw signal.
Are all BenQ monitors or only certain models mercury free?
All BenQ LED monitors are mercury free.
Do BenQ monitors use full-array LED lighting or edge-lit LED?
Currently, all BenQ LCD monitors are edge-lit design monitors.
Why is there no color mode option or why are there only specific color mode options for user selection in Display Pilot software?
Please enter the monitor OSD menu > System > Advanced > DDC/CI > ON to allow monitor settings to be set through the software on PC.
Note: DDC/CI, short for Display Data Channel/Command Interface, was developed by the Video Electronics Standards Association (VESA). DDC/CI capability allows monitor controls to be sent via software for remote diagnostics.
The projector stuck and error message shows “Installing upgrade package…” when it is powered on. What can I do to fix it?
This message indicates that firmware OTA upgrade process is not completed and projector is powered off last time. Please follow below steps to fix this issue. When projector is back to normal, make sure that keeping projector connected with power when performing OTA firmware upgrade.
(1) Power off the projector.
(2) Press ECO Blank button first, then press power key together for few seconds to power on projector.
(3) After projector powering on process is done, release the two buttons at the same time.
Are there any hazardous substances contained in the product? If so, in which part of the product? What are the ways to reduce any risk of exposure to hazardous substances while using the product?
In response to your concerns, we would like to inform you that BenQ is devoted to bringing the best quality products to our customers, so all of our display products are manufactured under strict supervision to ensure that they follow local safety regulations and exceed industry standards. We are also in full compliance with RoHS/REACH regulations, as well as California Proposition 65 (also called The Safe Drinking Water and Toxic Enforcement Act), which requests companies across industries to disclose the use of chemicals listed under this Act for their products. For more information about California Proposition 65, please visit this website:
We also want to inform you that BenQ’s display products include lead that can be found on internal PCBA components. For this reason, BenQ, as well as other leading electronics companies, have enforced the required caution labeling, with the fact that electronic components are generally internal to consumer level products, so the potential for consumer exposure to component surfaces is low, and the potential to reach specified exposure levels for the listed substances is even lower. To eliminate the chance of exposure to any hazardous substances, please do not attempt to disassemble your display product and try to repair the PCBA components yourself.
Nevertheless, we want to assure you that customer safety and health when using our products are our first priority. If you still have concerns or questions, please contact your local BenQ customer care team for further assistance.
Can I use Rosetta or Rosetta 2 with Apple M1 devices and Display Pilot?
Do BenQ monitors work with Mac M1?
Do I need to install the WHQL (Windows Hardware Quality Labs) driver in Windows for my BenQ monitor? Is there an updated version of the WHQL driver?
Microsoft pre-installs all relevant certifications and drivers for BenQ monitors in Windows.
It is not necessary to install any driver in a Windows desktop or notebook, as BenQ monitors are plug & play displays.
If there is no image on the screen, make sure your graphics card is activate and uses the latest driver version. Unlike monitors, graphics cards and adapters are not always plug & play.
BenQ only puts one ICC profile in the WHQL driver which can be downloaded from BenQ's official website, and is fine-tuned for the color space of the native panel. In general, the ICC profile won’t be updated unless the panel model is changed.
To follow user manual instructions to install a WHQL driver, the ICC profile (.icm file) will be applied in Windows on your PC.
After that, the color space of the native panel will be identified by your desktop or notebook.