How can I benefit from Multi-Stream Transport (MST)?

1. Power on all monitors and enable DisplayPort/USB-C and/or MST in the settings menu of each monitor.

2. Connect your laptop to monitor 1 by one of two ways:

    i. Connect the “DisplayPort Out” on your laptop to the “DisplayPort In” on the monitor using a DisplayPort cable

    ii. Or connect the “DisplayPort over the USB-C Out” on your laptop to the “DisplayPort over USB-C In” on the monitor using a USB-C cable

    iii. Or connect the “USB-C Out” on your laptop to the “USB-C In” on the monitor using a USB-C cable

3. Connect the “USB-C Out” on monitor 1 to the “USB-C In” on monitor 2 using a USB-C cable.

4. Repeat step 3 for any subsequent monitors.

 

NOTE:

- If using Mac, try with a Windows system. MST is available on MacOS via Thunderbolt connection only.

- Learn more about this topic here: https://www.benq.com/en-us/knowledge-center/knowledge/one-cable-to-daisy-chain-all-the-monitors.html

 

Applicable Models

RD240Q

Was this information helpful?

Yes No
TOP

Temporarily unavailable.

Link under maintenance.