The BenQ InstaShow WDC10 was designed to provide a simple, network independent wireless presentation solution that allows a high level of flexibility in conference room settings. No longer are presenters confined to the front of the room or wherever the wired legacy connection dictates. Presentations are easily made from anywhere in the room in three simple steps: Plug-in, Press the button, and Present. Additionally, the InstaShow comes with two transmitter buttons, so switching to another presenter can be done quickly at the press of a button.
For setup, you will need an open HDMI input on your projector or large format display. The wireless HDMI “receiver” module is connected to this input and to localized power. Then the USB/HDMI “transmitter” module is connected to your laptop or PC. For about five seconds, the light on the module will be red, indicating the unit is setting up the wireless encryption channel to the receiver. After this, the module button will turn green indicating all is ready. Next, just press the button and the wireless signal transmits to the screen. Once connected and throughout the presentation, the module will be in the “blue” color mode setting, indicating a stable and secure connection. The system can handle up to 16 different transmitter buttons and each presenter can follow these same easy steps to be up and running in seconds.
For those that are looking to show video, InstaShow is equipped with a video mode button which optimizes the picture for video transmission. This mode eliminates the choppiness and artifacts that you may have seen in the past when trying to project wireless video making it a very nice added feature.
Some may think that a simple Apple TV or a Chromecast device is good enough for meeting presentations, but it would be worth consulting with your IT department. Wireless transmission that is not secure creates risk to sharing content to unintended screens and it opens up potential theft risks from possible wireless hackers who have curiosity and proximity to your presentation environment. By effectively creating a “siloed” encrypted network between the InstaShow transmitter and receiver modules, you can keep your secure collaboration session directed at the intended audience without burden or risk to the company network. To compare the InstaShow vs. ClickShare, please see the table below.
While there are several wireless presentation solutions currently available, make sure to look into the differences. Proper choice and proper set up will minimize meeting distractions, important both for visitors and for your meetings to start on time as planned. ClickShare is well established and if your company does not have any concerns about 3rd party software apps on your notebook or PC, it is a solid choice. But if you want a software free, network independent, secure wireless HDMI presentation approach throughout your workplace, the InstaShow WDC10 from BenQ is worth taking a good hard look at. Plug in, Press, and Present. It really can be that easy.
