Why does the projected image flicker or freeze when using “Auto Screen Fit” with a 4K input source?

03-12-2026

The issue may be caused by the incorrect setup process, please follow the steps below to resolve it.

1. Go to OSD Menu and select “Reset System” to return all the settings to the

factory default.

2. Do the “Auto Screen Fit” again but make sure to follow the key points below,

you may need to move the projector if needed.

16:9 / 16:10 screens: it is recommended to keep the projection angle within 10° and the projector within 2.2 m from the screen.
4:3 / 1:1 screens: it is recommended to keep the projection angle within 20° and the projector within 2.2 m from the screen.

3. After finishing the “Auto Screen Fit”, do not make any adjustments in the

pop-up Corner Fit menu. Exit themenu first & connect a 4K source, then

readjust the Corner Fit using the remote control's Corner Fit hotkey or the

Corner Fit ption in the OSD menu.

Was this information helpful?

Yes No

Chat & Form

Get real time support from our BenQ Experts.