Cancel
LaptopBar uses a traceless back adhesive design to ensure no residue after removing the magnet patch. The removal steps are as follows:
1. Lift the lower edge of the magnet patch to expose the black adhesive.
2. Hold the magnet patch with one hand to prevent it from springing back and
hurting your hand. With the other hand, pull the black adhesive horizontally
to completely remove it, and the magnet patch can then be taken off
without leaving any marks.
Remember that after removal, the magnet patch can't be reused due to the loss of adhesive effectiveness.
Get real time support from our BenQ Experts.
