How do I affix the magnet patch?

12-01-2023

If you have the magnet patch application tool (inside the original package):

1. Use the included cleaning cloth to clean the laptop's surface.

2. Align the top edge of the magnet patch application tool with the top edge of
the laptop's surface.

3. Place the magnet patch inside the semi-circular positioning hole in the
application tool.

4. Press down evenly with your fingers on the magnet patch, and then let it sit
for 20 minutes to complete the process.

If you don't have a decorative sticker application tool:

1. Use a piece of cloth or a microfiber cloth to clean the laptop's surface.

2. Place the magnet patch on the laptop's surface, aligning it about 2.5cm
from the top edge.

3. Press down evenly with your fingers on the magnet patch, and then let it sit
for 20 minutes to complete the process.

Note:

*If the magnet patch is placed to high on the laptop, it may cover the laptop's
curved edge, preventing the sticker from adhering smoothly to the surface.

*If the magnet patch is applied too low on the laptop, it may restrict the angle
of operation for the lamp arm when the lamp is attached.

*During the 20-minute wait for the patch to take hold, please avoid placing
LaptopBar on the magnet patch to prevent the magnet inside the lamp from
lifting the patch prematurely. This could affect the adhesion of the patch to
the laptop and prevent successful assembly of the LaptopBar on the laptop.

Was this information helpful?

Yes No