Search history
Clear
EH700 4000lms 1080P Laser Smart Projector
Application
Can I control the BenQ projector with a remote control designed by other manufacturers?
Yes. When setting the remote control, please input the [custom code + IR code] or [IR code + custom code] based on the instruction on the remote control.
The custom code for BenQ is 0X30. For IR code, please refer to the user manual.
Learn more
Which reminder messages will stop being displayed after "Reminder Message" is switched off?
After "Reminder Message" option is switched off in OSD, the following messages will stop being displayed:
- All signal searching…
- No signal
- (Source) Source searching…
- (Source) Source detected
- Auto adjusting…
- Signal status(Source information menu)
- ECO BLANK/No source detected
- Out of range
- Best resolution
Learn more
- All signal searching…
- No signal
- (Source) Source searching…
- (Source) Source detected
- Auto adjusting…
- Signal status(Source information menu)
- ECO BLANK/No source detected
- Out of range
- Best resolution
Learn more
How do I mute the projector?
The projector can be muted using one of the following settings -
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.
Does the projector support change slides on PowerPoint using a remote which emulates page up and page down commands for both Windows PC and MacOS?
This function is only working with Windows PC/Laptop which is designed with and has PgUP and PgDn keys. HDMI (designed with MHL function) and USB Mini-B connection are required from the projector to your Windows PC/Laptop.
Learn more
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Can I disable AMS service?
Yes. Follow the below steps to disable AMS service.
- Please log in to your AMS administrator account, Select device information in the account menu, Select "UNBIND"
- Go to settings> AMS Service and set to "Off"
Specification
Which types of BenQ projectors require a power cycling process?
For BenQ projectors designed for general home entertainment and business use, we recommend powering off the projector for 2-3 minutes after every 12 hours of constant use for longer lasting reliability and maximized projector lifespan.
BenQ professional projectors designed with corresponding industrial standards can be used continuously for more than 12 hours and do not require a power cycling process as our home and general-use business projectors do.
If you have any questions, please contact your local BenQ customer care team for further assistance. Thank you.
Learn more
The Wired remote port is used to connect to a wired remote control. What is the maximum distance supported by the wired remote control?
The maximum distance supported by the wired remote control is 10 meters.
Learn more
Under what circumstances can I use HID devices (e.g. Mouse/Keyboard) on my projector?
You can connect the USB mouse to the projector's USB-1 or USB-2 port and use it only when selecting BenQ Launcher as the source amongst the source list.
Learn more
Can I install a third-party app on my projector?
Yes, you can install a third-party app from a USB Flash drive, but it' s not recommended as we cannot guarantee its compatibility with the projector.
Additionally, some apps require Google service (e.g. Skype), and therefore cannot run on the projector.
Explanation
How can I apply the bi-directional CEC function on the projector?
Regarding the CEC (Consumer Electronics Control) functionality on BenQ projectors. We understand your expectation for full bi-directional CEC support. However, after careful consideration of usage scenarios, we have designed our projector to limit CEC control to one-way communication.
This approach helps avoid unintended behaviors such as powering on all connected source devices simultaneously when the projector sends a CEC power-on command. In certain setups, this could cause user inconvenience or confusion. Additionally, it is important to note that not all source devices respond consistently to CEC commands—some may ignore power-on signals altogether.
We truly appreciate your understanding, and we will continue to work on the possible implementation of bi-directional CEC features in future updates and models. Should you have any further questions or suggestions, please feel free to reach out.
Further Query
Which types of BenQ projectors require a power cycling process?
For BenQ projectors designed for general home entertainment and business use, we recommend powering off the projector for 2-3 minutes after every 12 hours of constant use for longer lasting reliability and maximized projector lifespan.
BenQ professional projectors designed with corresponding industrial standards can be used continuously for more than 12 hours and do not require a power cycling process as our home and general-use business projectors do.
If you have any questions, please contact your local BenQ customer care team for further assistance. Thank you.
Learn more
The Wired remote port is used to connect to a wired remote control. What is the maximum distance supported by the wired remote control?
The maximum distance supported by the wired remote control is 10 meters.
Learn more
Under what circumstances can I use HID devices (e.g. Mouse/Keyboard) on my projector?
You can connect the USB mouse to the projector's USB-1 or USB-2 port and use it only when selecting BenQ Launcher as the source amongst the source list.
Learn more
Can I install a third-party app on my projector?
Yes, you can install a third-party app from a USB Flash drive, but it' s not recommended as we cannot guarantee its compatibility with the projector.
Additionally, some apps require Google service (e.g. Skype), and therefore cannot run on the projector.
My remote control is not working. What can be done to fix it?
Please follow below steps for troubleshooting:
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video Learn more
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video Learn more
Does Miracast support 4-spilt screen mirroring?
Miracast does not support 4-spilt screen mirroring. Please use Google Cast, AirPlay, or InstaShare if 4-spilt screen mirroring is required.
Learn more
3D is not working or getting lost sync on my projector. How can I fix it?
Please check the following settings to correct this issue.
1. If the source gives the correct 3D information to the projector, the projector will switch to 3D automatically.
If your source is from PC or steaming content, please select the correct 3D format via OSD Display > 3D > 3D mode.
2. Check the user manual and make sure that the resolution of your content supports 3D.
3. Press the DLP Link button on your 3D glasses to resync the projector and 3D glasses.
4. Please try to change the HDMI EDID setting to Standard.
5. Make sure that no other Projectors are sending DLP Link signals in the same room.
6. Watching in a relatively dark environment to avoid being influenced by other light sources.
7. Check the battery level on your DLP 3D Glasses
8. Adjust the watching distance and screen size within a normal range(Specs)
9. Stay in a fixed position, and try not to move too far/quickly on your head/3D glasses.
10. Try to adjust a colorful setting on the projector and avoid external light direct to your 3D glasses/screen.
11. If it's still not working, the issue might be caused by Hardware margin. You can switch to another projector or 3D glasses for a try.
Why can't I log in to my AMS account?
Before logging in, please check:
- If the projector is connected to a wireless network
- If the time zone is correct or not. The time zone has to match where the projector is
- The same account cannot be used on different devices at the same time.
How can I apply the bi-directional CEC function on the projector?
Regarding the CEC (Consumer Electronics Control) functionality on BenQ projectors. We understand your expectation for full bi-directional CEC support. However, after careful consideration of usage scenarios, we have designed our projector to limit CEC control to one-way communication.
This approach helps avoid unintended behaviors such as powering on all connected source devices simultaneously when the projector sends a CEC power-on command. In certain setups, this could cause user inconvenience or confusion. Additionally, it is important to note that not all source devices respond consistently to CEC commands—some may ignore power-on signals altogether.
We truly appreciate your understanding, and we will continue to work on the possible implementation of bi-directional CEC features in future updates and models. Should you have any further questions or suggestions, please feel free to reach out.
Can I control the BenQ projector with a remote control designed by other manufacturers?
Yes. When setting the remote control, please input the [custom code + IR code] or [IR code + custom code] based on the instruction on the remote control.
The custom code for BenQ is 0X30. For IR code, please refer to the user manual.
Learn more
Which reminder messages will stop being displayed after "Reminder Message" is switched off?
After "Reminder Message" option is switched off in OSD, the following messages will stop being displayed:
- All signal searching…
- No signal
- (Source) Source searching…
- (Source) Source detected
- Auto adjusting…
- Signal status(Source information menu)
- ECO BLANK/No source detected
- Out of range
- Best resolution
Learn more
- All signal searching…
- No signal
- (Source) Source searching…
- (Source) Source detected
- Auto adjusting…
- Signal status(Source information menu)
- ECO BLANK/No source detected
- Out of range
- Best resolution
Learn more
How do I mute the projector?
The projector can be muted using one of the following settings -
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.
Does the projector support change slides on PowerPoint using a remote which emulates page up and page down commands for both Windows PC and MacOS?
This function is only working with Windows PC/Laptop which is designed with and has PgUP and PgDn keys. HDMI (designed with MHL function) and USB Mini-B connection are required from the projector to your Windows PC/Laptop.
Learn more
How do I clean my projector lens?
It is normal to have some dust on the lens surface.
Please refer to the below video for a guide to cleaning your projector's lens.
Learn more
Can I disable AMS service?
Yes. Follow the below steps to disable AMS service.
- Please log in to your AMS administrator account, Select device information in the account menu, Select "UNBIND"
- Go to settings> AMS Service and set to "Off"