Visit BenQ Education Website for Education Solutions

How can I change WiFi Name (WiFi SSID) on QP30?

02-12-2026

1. Connect QP30 to your projector and the Internet.

2. Open your web browser and go to the address of the projector from your projected image as the following picture.

3. Click “Device Management” and then “Device Name”.

4. Enter the device name you prefer to use, and click OK.

 

Note: The QP30 is capable of upscaling the display and output it at up to 4K resolution. But if you're pairing the dongle with the 4:3, 16:10, 1:1, or non-standard impact screen, your image might be distorted while connecting.

Applicable Models

LK936ST

Was this information helpful?