How can I connect QP30 to the Internet for wireless projection?

1. Please connect QP30 to the HDMI port for the wireless dongle on the projector.

2. Switch the input signal to HDMI, and you will see the projected image as the following image.

3. Connect your computer to QP30 with WiFi SSID and Password.

4. IP address will be displayed when QP30 is connected to your computer. Open your web browser and go to the address of
    the projector from your projected image.

5. You will be directed to Internet Setup once QP30 is connected to your computer for the first time.

6. When QP30 is connected to the Internet as the following picture as the top-left corner of the projected image, you can
    use wireless projection, by following the instructions below.

For iOS/macOS devices

1. Select the WiFi network that the projector joined in the WiFi settings on your device, or directly to QP30 through WiFi
    SSID.

2. After opening control center, press screen mirroring and choose the projector (BenQ_xxxxxxxx) to start projection. 

For Android devices 

1. Select the WiFi network that the projector joined in the WiFi settings on your device, or directly to QP30 through WiFi
    SSID.

2. After opening the Quick settings panel, press the Screen Mirroring icon and choose the projector (BenQ_xxxxxxxx). 

For Windows OS devices 

1. Select the WiFi network that the projector joined in the WiFi settings on your device, or directly to QP30 through WiFi
    SSID.

2. Press the Windows + P / K and choose the projector (BenQ_xxxxxxxx).

Connection Status

1. QP30 is not connected to the internet, and no device is connected to QP30.

2. QP30 is connected to the internet, and no device is connected to QP30.

3. QP30 is not connected to the internet, and there is a device which is connected to QP30.