MX611 XGA Business Projector For Presentation


High Resolution & High Brightness Projector for Quality and Reliable Daily Presentation For Meeting Room
  • 4000 ANSI Lumen High brightness and 20,000:1 High Contrast
  • Exclusive Infographic Mode Showcases Text and Graphic in Detail
  • SmartEco Mode Saves Lamp Power Up To 70%t
Special Promotion
    MX611 XGA Business Projector For Presentation High Resolution & High Brightness Projector for Quality and Reliable Daily Presentation For Meeting Room
    • 4000 ANSI Lumen High brightness and 20,000:1 High Contrast
    • Exclusive Infographic Mode Showcases Text and Graphic in Detail
    • SmartEco Mode Saves Lamp Power Up To 70%t
    Special Promotion
      close-button

      Application

      Can I control the BenQ projector with a remote control designed by other manufacturers?
      Yes. When setting the remote control, please input the [custom code + IR code] or [IR code + custom code] based on the instruction on the remote control. The custom code for BenQ is 0X30. For IR code, please refer to the user manual.
      Which reminder messages will stop being displayed after "Reminder Message" is switched off?
      After "Reminder Message" option is switched off in OSD, the following messages will stop being displayed:
      - All signal searching…
      - No signal
      - (Source) Source searching…
      - (Source) Source detected
      - Auto adjusting…
      - Signal status(Source information menu)
      - ECO BLANK/No source detected
      - Out of range
      - Best resolution

      Specification

      Which types of BenQ projectors require a power cycling process?
      For BenQ projectors designed for general home entertainment and business use, we recommend powering off the projector for 2-3 minutes after every 12 hours of constant use for longer lasting reliability and maximized projector lifespan. BenQ professional projectors designed with corresponding industrial standards can be used continuously for more than 12 hours and do not require a power cycling process as our home and general-use business projectors do. If you have any questions, please contact your local BenQ customer care team for further assistance. Thank you.
      Learn more
      How long is the suggested working time for models which light source is UHP lamp?
      It is suggested to power cycle at least every 12 hours for more stable performance.

      Further Query

      Which types of BenQ projectors require a power cycling process?
      For BenQ projectors designed for general home entertainment and business use, we recommend powering off the projector for 2-3 minutes after every 12 hours of constant use for longer lasting reliability and maximized projector lifespan. BenQ professional projectors designed with corresponding industrial standards can be used continuously for more than 12 hours and do not require a power cycling process as our home and general-use business projectors do. If you have any questions, please contact your local BenQ customer care team for further assistance. Thank you.
      Learn more
      How long is the suggested working time for models which light source is UHP lamp?
      It is suggested to power cycle at least every 12 hours for more stable performance.
      My remote control is not working. What can be done to fix it?
      Please follow below steps for troubleshooting:
      (1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
      (2) Check if the batteries are out of power. Replace both of the batteries with new ones.
      (3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
      (4) Remove the obstacles between the remote control and projector.
      For demo, please refer to the tutorial video
      Learn more
      Can I control the BenQ projector with a remote control designed by other manufacturers?
      Yes. When setting the remote control, please input the [custom code + IR code] or [IR code + custom code] based on the instruction on the remote control. The custom code for BenQ is 0X30. For IR code, please refer to the user manual.
      Which reminder messages will stop being displayed after "Reminder Message" is switched off?
      After "Reminder Message" option is switched off in OSD, the following messages will stop being displayed:
      - All signal searching…
      - No signal
      - (Source) Source searching…
      - (Source) Source detected
      - Auto adjusting…
      - Signal status(Source information menu)
      - ECO BLANK/No source detected
      - Out of range
      - Best resolution