This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies, you can also manage preferences.

My remote control is not working. What can be done to fix it?


Please follow below steps for troubleshooting:
(1) Check if the remote receiver is turned off by accident in OSD. It should be turned to Front/Top/Front+Top.
(2) Check if the batteries are out of power. Replace both of the batteries with new ones.
(3) Make sure you are not too far away from the projector. Stand within 7 meters from the projector.
(4) Remove the obstacles between the remote control and projector.
For demo, please refer to the tutorial video

Was this information helpful?

Yes No