This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies, you can also manage preferences.
Find More

SW2700PT

Search for questions
/content/b2c/en-au/support/downloads-faq/products/monitor/sw2700pt/faq/jcr:content/par/faqsearch /content/b2c/en-au/support/downloads-faq/products/monitor/sw2700pt/faq /content/b2c/en-au/support/downloads-faq/faq true https://www.benq.com/en-au/support/downloads-faq/products/monitor/sw2700pt/faq/_jcr_content/par/faqsearch.faqsubfilter.json All Search
Why did my monitor not pick up the input signal automatically?
How can I enable sound from the speaker of my BenQ monitor?
Where can I find the latest driver for my LCD monitor?
Can a DVI cable carry audio?
Can I use X-rite ColorMunki or other calibrators to calibrate the SW monitors?
Can Palette Master Element work on a virtual OS, e.g. BootCamp, Paralles, or VMware?
Does Palette Master Element calibration software support both Windows and Mac OS?
How do I set up custom White Point in Palette Master Element ?
How frequent should I calibrate the monitor?
How long should I warm up the monitor before using it?
How to display pictures in 10-bit color?
The images look dark when calibrated at default settings with Palette Master Element. Can I set a higher brightness?
What are Preset Calibration Modes, and what are they used for?
Where is the log file of Palette Master Element?
Why can’t Palette Master Element be recognized by BenQ monitor thru USB 3.0 port connection?
The images look dark when calibrated at default setting with Palette Master Element. Can I set a higher brightness?
How do I setup customized White Point in Palette Master Element?
Why can’t the ICC profile made by Palette Master Element be loaded correctly?
How to display in 10-bit color?
How to change any color related setting under calibration 1 or 2 mode?
Will Palette Master Element work on virtual OS (examples: BootCamp/Paralles/VMware)?
What is the frequency that I should calibrate the monitor?
Does Palette Master Element calibration software support both Windows and Mac OS?
How to change any color related setting under calibration 1 or 2 mode?
How come the calibration results is bad when using HDMI connection?
How do I setup customized White Point in Palette Master Element ?
Can I calibrate the monitor without the shading hood?
Can I install and use the third party calibration software?
How long should I warm up before using the monitor?
How often should I calibrate monitors?
What are Preset Calibration Modes and what are they used for?
What should I do when my sensor is not recognized by the OS?
Can LCD monitor be used at a 24 hours per day environment?
Does Palette Master Element support any type of calibrator for calibration?
How long should monitor warm up before using?
How come Windows or Mac detects the monitor as "BenQ LCD" instead of it's corresponding BenQ monitor model name?
How does Eco sensor work?
Is it possible to measure ambient light temperature with Palette Master?
What is the shading hood used for ?
What is Reading mode?
What is M-book mode?
Can I calibrate the monitor without the shading hood?
What is the difference between HW calibration and SW calibration?
What should I do when my sensor is not recognized by the OS?
Why can’t the ICC profile made by Palette Master Element be loaded correctly?
Why is the contrast ratio lower than the claimed value after measurement?
Why do colors in websites look overly vivid with SW monitor?
Why is there a warning message when starting to install Palette Master Element in Mac?
Why contrast ratio is lower than claimed value after measurement?
Why do colors in websites look overly vivid with SW monitor?
Why there is no image when I connect the signal cable?
Why there is a warning message when start to install Palette Master Element
Every time after powering on the monitor and showing the BenQ logo, the display turns black and has no signal for 1~2 seconds, and then it becomes normal. Why is that and how do I fix it?
There is no sound coming out from my LCD monitor speaker.
My monitor is showing ghosting image (i.e. when scrolling the text or moving the mouse), how can I fix this problem?
My BenQ monitor doesn't turn on.
The power LED of my LCD monitor is On but the screen is completely black.
My monitor is connected to my PC through an HDMI cable, but no image is displayed on the screen although I can hear the sound.
The image on my monitor is flickering, how to fix this problem?
My BenQ monitor does not display any image when a D-SUB (VGA) cable is connected.
The monitors display vertical and horizontal stripes on the screen.
I recently purchased a BenQ monitor and have been trying to connect it to my notebook with an HDMI cable. But I keep getting a message "No Cable Connected" on the monitor. What suggestion can you provide to me for solving this problem?
Why are the calibration results bad when using HDMI connection?
Why cannot Palette Master Element recognize BenQ monitors with connection to the USB 3.0 port?
No image is displayed when I connect the signal cable. Why?
TOP