This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies, you can also manage preferences.
Find More

PV3200PT

Search for questions
/content/b2c/en-au/support/downloads-faq/products/monitor/pv3200pt/faq/jcr:content/par/faqsearch /content/b2c/en-au/support/downloads-faq/products/monitor/pv3200pt/faq /content/b2c/en-au/support/downloads-faq/faq true https://www.benq.com/en-au/support/downloads-faq/products/monitor/pv3200pt/faq/_jcr_content/par/faqsearch.faqsubfilter.json All Search
How to fix my monitor that did not take the input signal automatically?
How to play sound from the speaker of my monitor?
Where can I find the latest driver for my LCD monitor?
Can a DVI cable carry audio?
Can I run Palette Master Element on a virtual OS, such as BootCamp, Parallels, or VMware?
Does Palette Master Element calibration software support both Windows and Mac OS?
How to set up custom White Point in Palette Master Element?
How often should I calibrate my monitor?
How can I display pictures in 10-bit color?
Can I adjust the brightness and luminance target with Palette Master Element?
What is Preset Calibration Mode used for?
Where is the log file of Palette Master Element?
Why can’t Palette Master Element be recognized by BenQ monitor thru USB 3.0 port connection?
The images look dark when calibrated at default setting with Palette Master Element. Can I set a higher brightness?
How do I setup customized White Point in Palette Master Element?
Why can’t the ICC profile made by Palette Master Element be loaded correctly?
How to change any color related setting under calibration 1 or 2 mode?
Will Palette Master Element work on virtual OS (examples: BootCamp/Paralles/VMware)?
Does Palette Master Element calibration software support both Windows and Mac OS?
How to change any color related setting under calibration 1 or 2 mode?
How come the calibration results is bad when using HDMI connection?
How do I setup customized White Point in Palette Master Element ?
Can I install and use the third party calibration software?
How often should I calibrate monitors?
What are Preset Calibration Modes and what are they used for?
What is the difference between HW calibration and SW calibration?
What should I do when my sensor is not recognized by the OS?
How to enable Auto Pivot on PD2720U and PD3220U?
Can LCD monitor be used at a 24 hours per day environment?
Does Palette Master Element support any type of calibrator for calibration?
How long should monitor warm up before using?
How come Windows or Mac detects the monitor as "BenQ LCD" instead of it's corresponding BenQ monitor model name?
How does Eco sensor work?
Is it possible to measure ambient light temperature with Palette Master?
What is the shading hood used for ?
What is Reading mode?
What is M-book mode?
Can I calibrate the monitor without using the shading hood?
What is the difference between HW calibration and SW calibration?
What should I do when my sensor is not recognized by the OS?
Why are there darker areas on the screen?
How do I to load the correct ICC profile generated by Palette Master Element?
Why is the contrast ratio lower than the claimed value following the result of a measurement?
Why do colors in websites look overly vivid with PV monitors?
Why do images look darker when Uniformity is turned on?
How to resolve the warning message that was displayed when I started to install Palette Master Element on Mac?
Why are there darker areas on the screen?
Why can’t the ICC profile made by Palette Master Element be loaded correctly?
Why contrast ratio is lower than claimed value after measurement?
Why do colors in websites look overly vivid with PV monitor?
Why Image looks darker when uniformity is turned on?
Why there is no image when I connect the signal cable?
Why there is a warning message when start to install Palette Master Element
Why does my screen always show "No Signal" message for 1~2 seconds after powering on and then become normal again?
There is no sound coming out from my LCD monitor speaker.
My monitor is showing ghosting image (i.e. when scrolling the text or moving the mouse), how can I fix this problem?
How to fix my monitor that cannot be turned on?
How to fix my monitor that has black screen after powering on?
How to fix my monitor that plays sound but shows no image when connected to PC with HDMI cable?
How to fix the flickering image on my monitor?
How to fix my monitor that does not display any image when connected with a D-SUB (VGA) cable?
How to fix my monitor that displays vertical and horizontal stripes on the screen?
How to resolve "No Cable Connected" message on the monitor that is connected to my NB with HDMI cable?
Why are the calibration results bad when using an HDMI connection?
Why can't Palette Master Element recognize the monitor when connecting to USB 3.0 port?
No image is displayed when I connect the signal cable. Why?
The FDTI driver was not working when connection between PME and BenQ display failed. How do I fix it?
TOP