I. 上臂｜II. 下臂｜III. 安裝底座

IV. 顯示器支架｜V. C型夾具

A. 5 mm 六角板手｜B. 夾具螺絲 x 1 (M8 x 90)｜C. 穿線孔螺絲 x 1 (M8 x 130)

D. 鉸鏈墊圈 x 2｜E. 鉸鏈接頭｜F. 3 mm 六角板手

G. 鉸鏈螺絲 (M5 x 30)｜H. 螺絲 x 4 (M4 x 12)｜I. 墊圈 x 4 (D5)

J. 備品組

Illustration of package contents
Illustration of package contents

備註

此處顯示的圖片可能與您實際收到的產品及配件略有不同，請依實際供應品項為準。

產品總覽

Product overview
Product overview
內容
1. 安裝方式選擇
2-A. 安裝底座-夾具
2-B. 安裝底座-穿線孔
3. 安裝下臂
4. 安裝顯示器支架與上臂
5. 安裝顯示器
6. 張力調整
7. 線材收納（可選）
1. 安裝方式選擇
2-A. 安裝底座-夾具
2-B. 安裝底座-穿線孔
3. 安裝下臂
4. 安裝顯示器支架與上臂
5. 安裝顯示器
6. 張力調整
7. 線材收納（可選）

1. 安裝方式選擇

A. 夾具型安裝

Clamp mounting environment.
Clamp mounting environment.

B. 穿線孔安裝

Grommet mounting environment.
Grommet mounting environment.

2-A. 安裝底座-夾具

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

先將螺絲鎖到一半。

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

請小心拿取零件，避免掉落。

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

將螺絲鎖緊。

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. 安裝底座-穿線孔

請將孔位對齊。

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. 安裝下臂

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

螺絲請勿鎖太緊。

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. 安裝顯示器支架與上臂

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

將螺絲鎖緊。

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

請將孔位對齊。

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

螺絲請勿鎖太緊。

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. 安裝顯示器

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

請使用十字起子（包裝內未附）鎖上螺絲與墊圈。

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. 張力調整

試著將螢幕升高、降低或傾斜。如果無法保持理想的高度/角度，請依照說明調整。

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. 線材收納（可選）

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.