This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies, you can also manage preferences.
product-img

Large-Venue Laser Projector with, 10000lm, WUXGA | LU9915

BlueCore Laser Projectors from the World’s No.1 DLP Brand

Application

How to use 3D sync out connector?
There are two types of 3D sync out connectors. For the steps to use 3D sync out connectors, please refer to the tutorial video.
Learn more
Is it normal that the power LED flashes orange for around 10 seconds then becomes solid red, after the projector is turned on?
Yes, it is normal. When network standby mode is enabled, the power LED will flash until the power supply becomes stable.
How do I mute the projector?
The projector can be muted using one of the following settings -
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.

Further Query

As Abobe Flash support ends at the end of Dec 2020, the Crestron network interface will no longer work after that. Is there any solution for this?
How to use 3D sync out connector?
There are two types of 3D sync out connectors. For the steps to use 3D sync out connectors, please refer to the tutorial video.
Learn more
Is it normal that the power LED flashes orange for around 10 seconds then becomes solid red, after the projector is turned on?
Yes, it is normal. When network standby mode is enabled, the power LED will flash until the power supply becomes stable.
How do I mute the projector?
The projector can be muted using one of the following settings -
1. OSD > System setup > audio settings > mute
2.. Mute key on remote
The mute function will reset to default (Off) when the projector is restarted, which means audio will be on.
Therefore, if you wish to mute the projector permanently, please turn the audio volume down to 0. Volume levels do not reset for power cycles or restarts.