A. Màn hình LCD|B. Chân đế màn hình|C. Đế màn hình

D. Tài liệu sử dụng|E. Dây nguồn

F. Cáp USB-C™|G. Cáp HDMI G3|H. Cáp USB-B

Illustration of package contents
Illustration of package contents

Note

Hình ảnh hiển thị ở đây có thể khác với nội dung thực tế và sản phẩm được cung cấp theo khu vực của bạn.

Content
Cài đặt
Dòng Programming
Điều chỉnh góc
Cài đặt Display Pilot 2
Kết nối nhiều màn hình (daisy chaining)
Làm việc với nhiều đầu vào chỉ với một bộ bàn phím và chuột (KVM Switch)
Cài đặt
Dòng Programming
Điều chỉnh góc
Cài đặt Display Pilot 2
Kết nối nhiều màn hình (daisy chaining)
Làm việc với nhiều đầu vào chỉ với một bộ bàn phím và chuột (KVM Switch)

Cài đặt

1.

Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.
Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.

2.

Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.
Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.

3.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

4.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect the PC video cable.
Connect the PC video cable.

6.

Connect the power.
Connect the power.

7.

Remove the protective film.
Remove the protective film.

8.

Turn-on the power.
Turn-on the power.

Dòng Programming

Năng suất lập trình tối ưu

Thanh chức năng: A. Phím nguồn|B. Bộ điều khiển 5 chiều|C. Phím chức năng

MoonHalo: sử dụng bộ điều khiển 5 chiều để truy cập Menu Nhanh cho MoonHalo

Promanning Series Monitor Features: Function Bar and MoonHalo
Promanning Series Monitor Features: Function Bar and MoonHalo

Điều chỉnh góc

Adjust the viewing angle.
Adjust the viewing angle.

Cài đặt Display Pilot 2

Quản lý cài đặt màn hình của bạn một cách hiệu quả. (Tải về máy tính)

Display Pilot 2 software features
Display Pilot 2 software features

Kết nối nhiều màn hình (daisy chaining)

Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.
Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.

Làm việc với nhiều đầu vào chỉ với một bộ bàn phím và chuột (KVM Switch)

Kết nối

Connect the control devices and other USB peripherals to the USB ports on the monitor.
Connect the control devices and other USB peripherals to the USB ports on the monitor.

Connect at least two video sources to the monitor.
Connect at least two video sources to the monitor.

Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.
Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.