A. Màn hình LCD|B. Chân đế màn hình|C. Đế màn hình

D. Tài liệu hướng dẫn|E. Giá giữ cáp|F. Dây nguồn

G. Cáp HDMI|H. Cáp USB-C™

Illustration of package contents
Illustration of package contents

Note

Hình ảnh hiển thị có thể khác với thực tế và sản phẩm nhận được tuỳ theo khu vực của bạn.

Content
Cài đặt
Điều chỉnh góc
Cài đặt phần mềm
Cài đặt
Điều chỉnh góc
Cài đặt phần mềm

Cài đặt

1.

Attach the cable holder to the monitor stand.
Attach the cable holder to the monitor stand.

2.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

5.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

6.

Connect the PC video cable.
Connect the PC video cable.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

Điều chỉnh góc

Adjust the viewing angle.
Adjust the viewing angle.

Cài đặt phần mềm

Display Pilot 2: Quản lý cài đặt màn hình hiệu quả (Tải về cho PC)

Download and install the software Display Pilot 2 from BenQ website to the computer.
Download and install the software Display Pilot 2 from BenQ website to the computer.