A. LCD monitör|B. Monitör standı|C. Monitör tabanı

D. Kullanıcı dokümanları|E. Güç kablosu

F. USB-C™ kablo|G. HDMI Kablo G3|H. USB-B kablo

Illustration of package contents
Illustration of package contents

Note

Burada gösterilen görseller, kendi bölgeniz için tedarik edilen ürün ve gerçek içeriğinden farklılık gösterebilir.

Content
Kurulum
Programlama Serisi
Açı ayarı
Display Pilot 2'nin kurulumu
Birden fazla monitörü bağlama (zincirleme bağlantı)
Bir klavye ve mouse ile birden fazla girdiyi çalıştırma (KVM Anahtar)
Kurulum
Programlama Serisi
Açı ayarı
Display Pilot 2'nin kurulumu
Birden fazla monitörü bağlama (zincirleme bağlantı)
Bir klavye ve mouse ile birden fazla girdiyi çalıştırma (KVM Anahtar)

Kurulum

1.

Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.
Open the box, unfold the front side of the box as illustrated to leave some room for stand and base attachment.

2.

Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.
Attach the monitor stand to the monitor base as illustrated. Raise the thumbscrew lid and tighten the thumbscrew as illustrated. Then push the lid back.

3.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

4.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

5.

Connect the PC video cable.
Connect the PC video cable.

6.

Connect the power.
Connect the power.

7.

Remove the protective film.
Remove the protective film.

8.

Turn-on the power.
Turn-on the power.

Programlama Serisi

Maksimum Kodlama Verimliliği

Fonksiyon Çubuğu: A. Güç tuşu|B. 5-yönlü kontrolcü|C. Fonksiyon tuşu

MoonHalo: Quick Menü'ye erişmek için 5-yönlü kontrolcüyü kullanın

Promanning Series Monitor Features: Function Bar and MoonHalo
Promanning Series Monitor Features: Function Bar and MoonHalo

Açı ayarı

Adjust the viewing angle.
Adjust the viewing angle.

Display Pilot 2'nin kurulumu

Ekran ayarlarınızı verimli şekilde yönetin. (PC'ye indir)

Display Pilot 2 software features
Display Pilot 2 software features

Birden fazla monitörü bağlama (zincirleme bağlantı)

Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.
Connect your laptop to the USB-C™ / DP port on the monitor using a USB-C™ / DP cable, then connect the second monitor to the first one using a USB-C™ cable.

Bir klavye ve mouse ile birden fazla girdiyi çalıştırma (KVM Anahtar)

Bağlantılar

Connect the control devices and other USB peripherals to the USB ports on the monitor.
Connect the control devices and other USB peripherals to the USB ports on the monitor.

Connect at least two video sources to the monitor.
Connect at least two video sources to the monitor.

Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.
Once the KVM connections have been made properly, you can press the Function Key to cycle through available KVM sources.