A. LCD monitör|B. Monitör standı|C. Monitör tabanı

D. Kullanıcı dökümanları|E. Kablo tutucu|F. Güç kablosu

G. HDMI kablosu|H. USB-C™ kablosu

Illustration of package contents
Illustration of package contents

Note

Burada gösterilen görseller, bulunduğunuz bölgedeki gerçek ürün içeriğinden ve tedarik edilen üründen farklılık gösterebilir.

Content
Kurulum
Açı ayarı
Yazılım kurulumu
Kurulum
Açı ayarı
Yazılım kurulumu

Kurulum

1.

Attach the cable holder to the monitor stand.
Attach the cable holder to the monitor stand.

2.

Attach the monitor base to the monitor stand.
Attach the monitor base to the monitor stand.

3.

Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.
Raise the thumbscrew lid and tighten the thumbscrew. Then push the lid back.

4.

Orient and align the stand arm with the monitor, then push them together until they click and lock into place.
Orient and align the stand arm with the monitor, then push them together until they click and lock into place.

5.

Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.
Carefully lift the monitor, turn it over and place it upright on its stand on a flat even surface.

6.

Connect the PC video cable.
Connect the PC video cable.

7.

Connect the power.
Connect the power.

8.

Route the cables.
Route the cables.

9.

Turn-on the power.
Turn-on the power.

Açı ayarı

Adjust the viewing angle.
Adjust the viewing angle.

Yazılım kurulumu

Display Pilot 2: Ekran ayarlarınızı kolayca yönetin (PC'ye İndir)

Download and install the software Display Pilot 2 from BenQ website to the computer.
Download and install the software Display Pilot 2 from BenQ website to the computer.