I. 상부 암｜II. 하부 암｜III. 마운트 베이스

IV. 디스플레이 브래킷｜V. C-클램프

A. 5mm 육각 렌치｜B. 클램프용 나사 x 1(M8 x 90)｜C. 그로밋용 나사 x 1(M8 x 130)

D. 힌지 와셔 x 2｜E. 힌지 조인트｜F. 3mm 육각 렌치

G. 힌지 나사(M5 x 30)｜H. 나사 x 4(M4 x 12)｜I. 와셔 x 4(D5)

J. 예비 부품

Illustration of package contents
Illustration of package contents

Note

여기에 표시된 이미지는 실제 구성품 및 해당 지역에 공급되는 제품과 다를 수 있습니다.

제품 개요

Product overview
Product overview
컨텐트
1. 장착 옵션
2-A. 마운트 베이스 설치 - 클램프
2-B. 장착 베이스 설치 - 그로밋
3. 하단 암 설치
4. 디스플레이 브래킷 및 상부 암 설치
5. 모니터 설치
6. 장력 조절
7. 케이블 관리(선택 사항)
1. 장착 옵션
2-A. 마운트 베이스 설치 - 클램프
2-B. 장착 베이스 설치 - 그로밋
3. 하단 암 설치
4. 디스플레이 브래킷 및 상부 암 설치
5. 모니터 설치
6. 장력 조절
7. 케이블 관리(선택 사항)

1. 장착 옵션

A. 클램프

Clamp mounting environment.
Clamp mounting environment.

B. 그로밋

Grommet mounting environment.
Grommet mounting environment.

2-A. 마운트 베이스 설치 - 클램프

1.

Attach c-clamp to the mount base.
Attach c-clamp to the mount base.

2.

나사를 절반 정도 조이세요.

Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.
Fix c-clamp and the mount base with the clamp screw and the 5 mm Allen key. Do not tighten the screw all the way down at this moment.

3.

부품을 조심스럽게 잡고 떨어지지 않도록 하세요.

Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.
Attach the mount base together with the c-clamp to your desk. Hold the parts carefully and keep them from falling.

4.

나사를 조이세요.

Fully tighten the screw to secure all parts together by the 5 mm Allen key.
Fully tighten the screw to secure all parts together by the 5 mm Allen key.

2-B. 장착 베이스 설치 - 그로밋

구멍을 정확히 맞추세요.

Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.
Turn the c-clamp and fix it and the mount base with the grommet screw and the 5 mm Allen key.

3. 하단 암 설치

1.

Align the lower arm with the mount base and place it properly without the metal part being seen.
Align the lower arm with the mount base and place it properly without the metal part being seen.

2.

Decide the swivel range by the thumbscrew on the inner side of the lower arm.
Decide the swivel range by the thumbscrew on the inner side of the lower arm.

3.

나사를 너무 세게 조이지 마세요.

Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.
Use the 5 mm Allen key to secure the lower arm and the mount base by the stop screw.

4. 디스플레이 브래킷 및 상부 암 설치

1.

Move the hinge on the display bracket away from the thumbscrew.
Move the hinge on the display bracket away from the thumbscrew.

2.

나사를 조이세요.

Secure the hinge with the display bracket using the 5 mm Allen key.
Secure the hinge with the display bracket using the 5 mm Allen key.

3.

Insert the hinge washers to the display bracket.
Insert the hinge washers to the display bracket.

4.

구멍을 정확히 맞추세요.

Attach the display bracket to the upper arm. Align the holes properly.
Attach the display bracket to the upper arm. Align the holes properly.

5.

Align the hinge joint with the holes properly.
Align the hinge joint with the holes properly.

6.

Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.
Fasten the hinge joint with the hinge screw. The hinge joint and its screw should be flat without protrusions.

7.

Align the upper arm with the lower arm and place it properly without the metal part being seen.
Align the upper arm with the lower arm and place it properly without the metal part being seen.

8.

나사를 너무 세게 조이지 마세요.

Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.
Use the 5 mm Allen key to secure the arm by the stop screw. Do not overtighten the screw.

5. 모니터 설치

1.

Release the thumbscrew on the display bracket and detach the VESA plate.
Release the thumbscrew on the display bracket and detach the VESA plate.

2.

십자 드라이버(패키지에 포함되지 않음)를 사용하여 나사와 와셔를 고정하세요.

Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.
Attach the VESA plate to the VESA holes on the rear of your VESA-compliant monitor and fasten it with washers and screws.

3.

Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.
Align to hook the monitor up on the display bracket. Secure the monitor and the bracket with the thumbscrew while holding the monitor with another hand.

6. 장력 조절

모니터를 들어 올리거나 내리거나 기울여 보세요. 원하는 높이/각도에서 모니터가 고정되지 않으면 그림과 같이 조절하세요.

Adjust lift strength.
Adjust tilt strength.
Adjust lift strength.
Adjust tilt strength.

7. 케이블 관리(선택 사항)

1.

Remove the cable covers on the arm.
Remove the cable covers on the arm.

2.

Route the cables properly and re-install the cable covers.
Route the cables properly and re-install the cable covers.