How to change the lamp?

03-06-2017
Allow for 45 minutes of cooldown if projector has been in use. Please follow these steps: 1. Turn off the main power source and unplug power cable. 2. Loosen the screws located under the cover of the light bulb with a screwdriver. 3. Loosen the screws that fasten the light bulbs. Hold the handles of both sides of the bulb, take out the screws carefully. 4. Put in the new bulb and fasten the screws that were originally used to hold the light bulb. 5. Fasten the cover of the light bulb below the projector with the original screws 6. Please do not turn on the power before covering the light bulb with the cover because of safety considerations.

Modèles applicables

DX819ST, GP10, GP20, JOYBEE GP2, LW61ST, LX60ST, MS504, MS521, MS616ST, MW767, MW820ST, MW821ST, MW851UST, MW870UST, MX805ST, MX819ST, MX822ST, MX850UST, SH940, SH960, SX914, W1500, W7000+, MW523, MW663, MW721, MW817ST, MX600, MX522, MX661, MX618ST, MX720, MX703, MX766, MX722, MX816ST, MX815ST, S30, SH910, SP840, SP920P, W1070, W1080ST, 3D GLASSES - DP2, 3D GLASSES - DC4, 3D GLASSES, 3D GLASSES - DP3, GP10 DVD PLAYER, CEILINGMOUNTCM00G2, MS502, MH680, MW519, MX503, MX505, MX518, MX520, MX522P, MX620ST, MX662, POINTDRAW 3, PW01, QPRESENTER-ANDROID, QPRESENTER-IPHONE, W750, W770ST, W1300, W1400, WDAM2120, WDRT8192, MS517, MS521P, MS619ST, 0.3 WALL MOUNT-WM03G2, 0.3 WALL MOUNT-WM03G3, 0.4 WALL MOUNT-WM04G2, 0.4 WALL MOUNT-WM04G3, 0.6 WALL MOUNT-WM06G2, 0.6 WALL MOUNT-WM06G3, GP3, MW621ST, W7500, SX912, SP870, CEILING MOUNT-CM00G1, EP5920, MP525P, MP575, MP615P, MP776, MP780 ST, MP780ST+, MS510, MS513, MS612ST, MS614, MW516, MW712, MW811ST, MW814ST, MW860USTI, MX501, MX511, MX514, MX613ST, MX615, MX660, MX660P, MX701, MX710, MX711, MX717, MX763, MX764, MX810ST, MX812ST, MX813ST, WIRELESS DONGLE, SP890, SP891, W1060, W1100, W1200, W6000, W7000, W710ST, MX716

Afficher moins arrow-up

Ces informations vous ont-elles été utiles ?

TOP