I. Upper arm|II. Lower arm|III. Mount base

IV. Display bracket|V. C-clamp

A. Reinforcement plates and cushion mat|B. 6 mm Allen key|C. Screw for clamp x 1 (M8 x 75)

D. Screw for grommet x 1 (M8 x 150)|E. Clamp plate|F. Retainer (rotation stopper)

G. 4 mm Allen key|H. Hinge washer x 2|I. Hinge screw

J. Hinge joint|K. Screw x 4 (M4 x 12)|L. Washer x 4 (D5)

M. Cable clip|N. Spare parts

BHS01_online QSG_1218
BHS01_online QSG_1218

Note

The images shown here may differ from the actual contents and the product supplied for your region.

Product overview

BHS01_online QSG_1218
BHS01_online QSG_1218
Content
1. Mounting options
2. Desk protection (recommended)
3-A. Installing mount base - Clamp
3-B. Installing mount base - Grommet
4. Installing lower arm
5. Installing display braket and upper arm
6. Installing a monitor
7. Cable management (optional)
Tension adjustments
1. Mounting options
2. Desk protection (recommended)
3-A. Installing mount base - Clamp
3-B. Installing mount base - Grommet
4. Installing lower arm
5. Installing display braket and upper arm
6. Installing a monitor
7. Cable management (optional)
Tension adjustments

1. Mounting options

A. Clamp

BHS01_online QSG_1218
BHS01_online QSG_1218

B. Grommet

BHS01_online QSG_1218
BHS01_online QSG_1218

2. Desk protection (recommended)

Required for glass or fragile tabletops.

Use reinforcement plates to protect tabletops and enhance stability.

BHS01_online QSG_1218
BHS01_online QSG_1218

BHS01_online QSG_1218
BHS01_online QSG_1218

3-A. Installing mount base - Clamp

1.

BHS01_online QSG_1218
BHS01_online QSG_1218

2.

Tighten the screw halfway.

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

BHS01_online QSG_1218
BHS01_online QSG_1218

4.

Hold the parts carefully and keep them from falling.

BHS01_online QSG_1218
BHS01_online QSG_1218

5.

BHS01_online QSG_1218
BHS01_online QSG_1218

6.

Tighten the screw.

BHS01_online QSG_1218
BHS01_online QSG_1218

3-B. Installing mount base - Grommet

1.

Align the holes properly.

BHS01_online QSG_1218
BHS01_online QSG_1218

2.

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

Tighten the screw.

BHS01_online QSG_1218
BHS01_online QSG_1218

4. Installing lower arm

1.

BHS01_online QSG_1218
BHS01_online QSG_1218

2.

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

Do not overtighten the screw.

BHS01_online QSG_1218
BHS01_online QSG_1218

5. Installing display braket and upper arm

1.

BHS01_online QSG_1218
BHS01_online QSG_1218

2.

Align the holes properly.

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

BHS01_online QSG_1218
BHS01_online QSG_1218

4.

BHS01_online QSG_1218
BHS01_online QSG_1218

5.

BHS01_online QSG_1218
BHS01_online QSG_1218

6.

Do not overtighten the screw.

BHS01_online QSG_1218
BHS01_online QSG_1218

6. Installing a monitor

1.

BHS01_online QSG_1218
BHS01_online QSG_1218
BHS01_online QSG_1218
BHS01_online QSG_1218

2.

Fix the screws and washers by a cross-pointed screwdriver (not included in the package).

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

BHS01_online QSG_1218
BHS01_online QSG_1218

7. Cable management (optional)

1.

BHS01_online QSG_1218
BHS01_online QSG_1218

2.

BHS01_online QSG_1218
BHS01_online QSG_1218

3.

BHS01_online QSG_1218
BHS01_online QSG_1218

Tension adjustments

Try to lift, lower, or tilt the monitor. If it does not stay at the preferred height/angle, make adjustment as illustrated.

BHS01_online QSG_1218
BHS01_online QSG_1218

BHS01_online QSG_1218
BHS01_online QSG_1218