A. ScreenBar Max lamp head｜B. ScreenBar Max lamp arm (with desk clamp)｜C. Power adapter (with power cord)

D. L-shaped Hex key｜E. Quick Start Guide｜F. Lamp head mounting screws x 4 (2 are spares)

Illustration of package contents
Illustration of package contents

Note

The images shown here may differ from the actual contents and the product supplied for your region.

Content
Setup
Angle adjustments
Control Panel Overview
Height Adjustment
Presence Detection Range
Setup
Angle adjustments
Control Panel Overview
Height Adjustment
Presence Detection Range

Setup

1.

Insert the lamp head into the adjustment arm, pull out the arm, and secure the lamp head using the included hex key and two mounting screws.
Insert the lamp head into the adjustment arm, pull out the arm, and secure the lamp head using the included hex key and two mounting screws.

2.

- Place the clamp firmly against the desk edge and tighten the screw until secure.

- The placement of the screen is as shown in the illustration below.

Loosen the clamp screw, position the clamp at the desk edge, then tighten the screw to secure the lamp arm.
Loosen the clamp screw, position the clamp at the desk edge, then tighten the screw to secure the lamp arm.

3.

Connect the power cord to the lamp arm, secure it in the cord groove, then plug in the power adapter.
Connect the power cord to the lamp arm, secure it in the cord groove, then plug in the power adapter.

4.

Tap the Power button to turn on.
Tap the Power button to turn on.

Angle adjustments

Angle adjustments.
Angle adjustments.

Control Panel Overview

A. Presence detection｜B. Front/rear light mode｜C. Decrease brightness

D. Increase brightness｜E. Auto-dimming mode｜F. Front light brightness indicator

G. Color temperature indicator｜H. Rear light brightness indicator｜I. Digital reading mode

J. Decrease color temperature｜K. Increase color temperature｜L. My favorite mode

M. Power

Control panel overview.

My favorite mode: hold for 3 seconds to save brightness & color temperature.
Control panel overview.

Height Adjustment

- The lamp head is set to the maximum height by default. To lower it, follow the steps below.

- Hold the upper lamp arm firmly to prevent slipping and pinched fingers.

Height Adjustment.
Height Adjustment.

Presence Detection Range

- With its mmWave sensor 27.9 inch above the desktop, it detects at 23.6 ± 3.9 inch in front of the screen and has a conical detection shape.

- Presence detection is motion-based. Remaining still for extended periods may cause the light to turn off.

- Turning off the light disables presence detection for 30 seconds. Detection resumes when the indicator stops flashing.

Presence Detection Range
Presence Detection Range