هذا الموقع يستخدم ملفات تعريف الارتباط. من خلال الاستمرار في تصفح الموقع، فأنت توافق على استخدامنا لملفات تعريف الارتباط، ويمكنك أيضًا إدارة التفضيلات.
معرفة المزيد

Every time after powering on the monitor and showing the BenQ logo, the display turns black and has no signal for 1~2 seconds, and then it becomes normal. Why is that and how do I fix it?

08-14-2018

Please confirm if you are using D-sub or DVI for connection. If you are using DVI for connection, your feedback is then considered normal because the monitor will detect connection from D-sub first. If there is no signal from D-sub, then it will search for DVI for connection. There will be a lack of input signals for only a short time. The display will indicate “no signal”. If you are using D-sub for connection and this symptom occurs, please contact your nearest service center for inspection.

البحث عن الأسئلة
/content/b2c/ar-me/support/downloads-faq/faq/product/troubleshooting/monitor-faq-k-00001/jcr:content/faqpar/faqsearch /content/b2c/ar-me/support/downloads-faq/faq/product/troubleshooting/monitor-faq-k-00001 /content/b2c/ar-me/support/downloads-faq/faq false https://www.benq.com/ar-me/support/downloads-faq/faq/product/troubleshooting/monitor-faq-k-00001/_jcr_content/faqpar/faqsearch.faqsubfilter.json الجميع بحث
لا توجد أسئلة متداولة ذات صلة
TOP